常规材料化学成分分析 Conventional Material Chemical Composition Analysis
(黑色金属Ferrous Metals 、铝及铝合金 Aluminum &Aluminum-Base Alloy、镁及镁合金Magnesium and Magnesium-base Alloy、锌及锌合金Zinc and Zinc-base Alloy、铜及铜合金Copper &Copper-Base Alloy、钛及钛合金Titanium and Titanium-base Alloy、其他金属ohters) |
非常规金属材料化学成分分析 Unconventional Metal Material Chemical Composition Analysis
(化合物Compound、液体Liquid、废弃物Waste、铁矿Iron Mine、磁铁Magnet、触点Contactor、钎料Brazing Filler Metal、粉末冶金Powder Metallurgy、表面分析Surface Analysis) |
XRD
（物相定性Qualitative、物相定性半定量Qualitative semi-quantitative、结晶度Crystallinity、晶格常数The lattice constant） |
力学性能测试 Mechanics Performance Testing
(拉伸tension、泊松比/弹性模量Poisson's ratio/modulus of elasticity、弯曲bend、冲击impact、压缩compression、压扁flattening、剪切Shear test 、扩口Flaring test；
螺丝螺栓类Bolts , studs & ScrewsTesting（破坏扭矩torque test、氢脆Hydrogen embrittlement test、抗拉强度Screw bolt tensile strength、楔负载Wedge load、保证载荷Proof load))； |
硬度/金相/断口分析/失效分析 Hardness/Metallographic/Fracture analysis/Failure analysis
(洛氏Rockwell、布氏Brinell、维氏Vicker、努氏Knoop、里氏Leeb；
金相 Metallographic Analysis、晶粒度Grain Size、非金属夹杂物评定Evaluation of the nonmetallic inclusion、显微分析Microscopic Analysis、硬化层深度Case hardening depth；断口分析 Fracture Analysis、失效分析Failure analysis）、铝合金晶间腐蚀试验方法 |
表面分析/涂镀层 Surface analysis/Coating
(SEM/EDS及表面分析SEM-EDS Surface analysis、镀层厚度coating thickness、镀层表面形貌The coating surface morphology、镀层结构分析、The coating structure analysis、镀层成分composition of coating、镀层重量coating mass、封孔质量Seal quality、铬镀层裂纹、微孔数 Micro-cracks and micro-pores of Chromium coating、镀层孔隙率Porosity of coatings、附着力adhesion) |
金属材料热学性能/零部件清洁度 Metal Thermal Properties/Cleanliness of component
(线性膨胀系数Coefficient of Linear Thermal Expansion、熔点Melting Point、比热容Specific Heat Capacity、热扩散系数Thermal Diffusion Coefficient、导热系数Thermal Conductivity Coefficient、导电率Electric conductivity、零部件清洁度Cleanliness of component、耐化学试剂Chemical Resistance、封孔质量（失重） Quality of sealed（ weightlessness）、阳极氧化膜重量（膜重）Weight of anodized film (coating weight)），表面油污清洁度Cleanliness of surface oil |
焊接Welding
焊接工艺评定Welding Procedure Specification、焊工技能评定Performance Qualification |
无损检测NDT
UT、MT、PT、ET、VT、TOFD、PAUT、RT、CR、DR |
